LDA

You Are Here: Home » Products » LDA
Model Descreption Photo
NEO - PA/VA SYSTEM
LDANEO8060S02 PUBLIC ADDRESS AND VOICE ALARM SYSTEM MODEL LDA NEO 8060: The PA/VA system LDA NEO
8060 meets the EN 54-16 and EN 60849 standards for emergency voice evacuation. NEO 8060 offers 5 analog audio inputs and 8 power amplifier channels of 120W (60Wrms) per channel at 100V lines. A+B wiring. 8 pre- amp outputs. 22 GPIO ports (8 supervised for integration with CIE). Triple Ethernet port (for providing Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy- chain mode (up to 1024 zones). Audio Matrix 7x8 (digital up to 39x2014). It allows 8 remote devices in its ACSI bus, either microphones MPS-8Z or voice alarm panels VAP1 (with up to 7 expansion units per device). LED indicators according to standard. 4.3 Touch screen. Integrated emergency microphone. Balanced audio I/O.
4GB of internal memory for pre-recorded messages. DSP. Configuration and event creation software included. Dimensions: 483 x 88 x 455 mm. Weight: 13,15 Kg.
NEO ACCESSORIES
LDAMPS8ZS02
MULTI-ZONE PAGING MICROPHONE MODEL LDA MPS-8Z. It includes 8 zone buttons, a All-Zones Call button, Recall function, and LED indicators for selected-zone, occupied-zone and floor taken, as well as system indicators according to EN54-16 standard. PPT or Latch mode. It allows activation of Ding-Dong sound. The buttons can be configured from the configuration software to activate events in the system: equalization or gain adjustment, recording or playback of pre-recorded messages, source routing, etc. It is connected to the system throught standard UTP Ethernet cable in bus mode. It includes transparent cover for zone's names indication. Maximum bus distance: 1000m. Dimensions: 95 x 65 x 190 mm. Weight: 0,93 Kg.
LDAMPS8KS01 EXPANSION UNIT MODEL LDA MPS-8K for the paging microphone MPS-8Z. It adds 8 extra programmable buttons that can be asigned to different zones by the configuration software. It includes transparent cover for zone's names indication. Up to 7 MPS-8K units per MPS-8Z microphone.
LDATFL1S01 END OF LINE DEVICE MODEL LDA TFL-1 (2 UNITS PACK). It provides an accurate measurement of the speakers line impedance in order to test the integrity of the connection between the speakers and the PA/VA system. It is a compact device very simple to install in 100V or 70V lines. It has a low power consumption and several devices can be connected to the same speakers line.

LDAVAP1S01
FIREMAN'S PANEL MODEL LDA VAP-1. External remote control that incorporates an emergency microphone and provides direct access to voice evacuation functionalities of the NEO system. Supervised according to the EN 54-16 standard. It allows up to 7 8-zone expansion units, for adding zone selection buttons.
LDAVAP8KS01 EXPANSION UNIT MODEL LDA VAP-8K for the fireman's panel VAP-1. It adds 8 extra programmable buttons that can be asigned to different zones by the configuration software. It includes transparent cover for zone's names indication. Up to 7 VAP-8K units per VAP-1 panel.
DIGITAL AMPLIFIERS STV SERIES
LDASTV2200S01 DIGITAL AMPLIFIER MODEL LDA STV-2200. Power 2x200W rms @100V/70V (configurable by software), Frequency Response: 20-20000Hz +/- 0.1dB, THD+N<0.05%, S/N>105dB, 10 K Ohms XLR 3-pin Euroblock balanced input, 10 K Ohms balanced priority input with control and loop-through-output via 4-pin Euroblock connectors. Direct output power without transformer, 2-pin Euroblock connectors up to 4mm cross section cable. Protections for short circuit, temperature, overload, operation monitor, power input sensor, output power meter. Potentiometer to adjust gain per channel. Graphic display and navigation control for configuration and monitoring from front panel. Integrated DSP. Control and adjustment with A/B type mini USB connection. Indicators: On/Standby, Protect, Priority, Signal, Clip, Status, Link. Dimensions in mm (Height x Width x Depth): 2U 88x483x455, Weight:21.8 Kg. It includes the ETX-1 expansion module: Control and supervision of all features via Ethernet.
LDASTV4200S01 DIGITAL AMPLIFIER MODEL LDA STV-4200. Power 4x200W rms @100V/70V (configurable by means of software), Frequency Response: 20-20000Hz +/- 0.1dB, THD+N<0.05%, S/N>105dB, 10 K Ohms XLR 3-pin Euroblock balanced input,
10 K Ohms balanced priority input with control and loop-through-output via 4-pin Euroblock connectors. Direct output power
without transformer 2-pin Euroblock connectors up to 4mm cross-section cable. Protections for short circuit, temperature, overload, operation monitor, power input sensor, output power meter. Potentiometer to adjust gain per channel. Graphic display and navigation control for configuration and monitoring from front panel. Integrated DSP. Control and adjustment with A/B type mini USB connection. Indicators: On/Standby, Protect, Priority, Signal, Clip, Status, Link. Dimensions in mm (HxWxD): 2U 88x483x455, Weight: 21.8 Kg. It includes the ETX-1 expansion module: Control and supervision of all features via Ethernet.
DIGITAL AMPLIFIER MODEL LDA STV-4200. Power 4x200W rms @100V/70V (configurable by means of software), Frequency Response: 20-20000Hz +/- 0.1dB, THD+N<0.05%, S/N>105dB, 10 K Ohms XLR 3-pin Euroblock balanced input,
10 K Ohms balanced priority input with control and loop-through-output via 4-pin Euroblock connectors. Direct output power
without transformer 2-pin Euroblock connectors up to 4mm cross-section cable. Protections for short circuit, temperature, overload, operation monitor, power input sensor, output power meter. Potentiometer to adjust gain per channel. Graphic display and navigation control for configuration and monitoring from front panel. Integrated DSP. Control and adjustment with A/B type mini USB connection. Indicators: On/Standby, Protect, Priority, Signal, Clip, Status, Link. Dimensions in mm (HxWxD): 2U 88x483x455, Weight: 21.8 Kg. It includes the ETX-1 expansion module: Control and supervision of all features via Ethernet.
DIGITAL AMPLIFIER MODEL LDA STV-4200. Power 4x200W rms @100V/70V (configurable by means of software), Frequency Response: 20-20000Hz +/- 0.1dB, THD+N<0.05%, S/N>105dB, 10 K Ohms XLR 3-pin Euroblock balanced input,
10 K Ohms balanced priority input with control and loop-through-output via 4-pin Euroblock connectors. Direct output power
without transformer 2-pin Euroblock connectors up to 4mm cross-section cable. Protections for short circuit, temperature, overload, operation monitor, power input sensor, output power meter. Potentiometer to adjust gain per channel. Graphic display and navigation control for configuration and monitoring from front panel. Integrated DSP. Control and adjustment with A/B type mini USB connection. Indicators: On/Standby, Protect, Priority, Signal, Clip, Status, Link. Dimensions in mm (HxWxD): 2U 88x483x455, Weight: 21.8 Kg. It includes the ETX-1 expansion module: Control and supervision of all features via Ethernet.
LDASTV2400S01 DIGITAL AMPLIFIER MODEL LDA STV-2400. Power 2x400W rms @100V/70V (configurable by means of software), Frequency Response: 20-20000Hz +/- 0.1dB, THD+N<0.05%, S/N>105dB, 10 K Ohms XLR 3-pin Euroblock balanced input,
10 K Ohms balanced priority input with control and loop-through-output via 4-pin Euroblock connectors. Direct output power
without transformer 2-pin Euroblock connectors up to 4mm cross-section cable. Protections for short circuit, temperature, overload, operation monitor, power input sensor, output power meter. Potentiometer to adjust gain per channel. Graphic display and navigation control for configuration and monitoring from front panel. Integrated DSP. Control and adjustment with A/B type mini USB connection. Indicators: On/Standby, Protect, Priority, Signal, Clip, Status, Link. Dimensions in mm (HxWxD): 2U 88x483x455, Weight: 21.8 Kg. It includes the ETX-1 expansion module: Control and supervision of all features via Ethernet.
LDASTV4400S01 LDA AMPLIFIER MODEL STV-4400. Power 4x400W rms @100V/70V (configurable by means of software), Frequency Response: 20-20000Hz +/- 0.1dB, THD+N<0.05%, S/N>105dB, 10 K Ohms XLR 3-pin Euroblock balanced input, 10 K Ohms balanced priority input with control and loop-through-output via 4-pin Euroblock connectors. Direct output power without transformer 2-pin Euroblock connectors up to 4mm cross-section cable. Protections for short circuit, temperature, overload, operation monitor, power input sensor, output power meter. Potentiometer to adjust gain per channel. Graphic display and navigation control for configuration and monitoring from front panel. Integrated DSP. Control and adjustment with A/B type mini USB connection. Indicators: On/Standby, Protect, Priority, Signal, Clip, Status, Link. Dimensions in mm (Height/Width/Depth):
2U 88x483x455, Weight: 21.8 Kg. It includes the ETX-1 expansion module: Control and supervision of all features via
Ethernet.

LDASTV2800S01
 DIGITAL AMPLIFIER MODEL LDA STV-2800. Power 2x800W rms @100V/70V (configurable by means of software), Frequency Response: 20-20000Hz +/- 0.1dB, THD+N<0.05%, S/N>105dB, 10 K Ohms XLR 3-pin Euroblock balanced input,
10 K Ohms balanced priority input with control and loop-through-output via 4-pin Euroblock connectors. Direct output power
without transformer 2-pin Euroblock connectors up to 4mm cross-section cable. Protections for short circuit, temperature, overload, operation monitor, power input sensor, output power meter. Potentiometer to adjust gain per channel. Graphic display and navigation control for configuration and monitoring from front panel. Integrated DSP. Control and adjustment with A/B type mini USB connection. Expansion bay for ETX module connection. Indicators: On/Standby, Protect, Priority, Signal, Clip, Status, Link. Dimensions in mm (HxWxD): 2U 88x483x455, Weight: 21.8 Kg. It includes the ETX-1 expansion module: Control and supervision of all features via Ethernet. USB port mini-usb A/B type.

LDAETX1CNS01
 COBRANET EXPANSION MODULE LDA ETX-1CN. Control and monitoring via Ethernet of all features of STV series amplifiers. RJ45 type input. Cobranet link (8 bundles) via standard Ethernet network 2xRJ-45 with redundant connection for automatic commutation. Connection with A/B type mini USB.
DIGITAL AMPLIFIER PMX SERIES
LDAPMX6100S02 LDA MULTICHANNEL AMPLIFIER MODEL PMX6-100. 6 power amplifier channels of 100W rms each @70V, Frequency Response: 20-20000Hz +/- 0.1dB, THD<0.1%, S/N>105dB, 6 10 K Ohms balanced Euroblock type inputs, 10 K Ohms balanced priority Euroblock input connector with control. Indicators: Power, Standby, Protect, Signal, Clip, Ethernet, Volume, Control and Monitoring via Ethernet connection: RJ45, amplification channel tester to comply with EN-UNE 60849, Dimensions in mm (HxWxD): 2U 88x483x455, Weight: 18.1 Kg.
DIGITAL AUDIO MATRIX ZES SERIES
LDAZES80BS02 DIGITAL AUDIO MATRIX 8x8 WITH DSP AND COBRANET LINK + GPIO + LDA AUDIO MONITOR MODEL LDA ZES-80.
8 10 K Ohms Euroblock balanced inputs with selectable phantom power supply (48V) to 8 100 Ohms balanced Euroblock outputs, 16 configurable I/O GPIO ports. Audio monitor 2 Wrms, 1 RS-485 port. Cobranet link (8 bundles) via standard Ethernet network, Frequency Response: 20-20000Hz +/- 0.5dB, THD+N<0.005dB, S/N>105dB, DSP: Equalizers, gain, compressor, limiters, generators, noise gates, AGC, Control and monitoring: RJ-45 connector for Ethernet, Indicators: Output signal, Clip, On, LDA link, Display, Dimensions in mm (HxWxD): 1U 44 x 483 x 310, Weight: 4.75 Kg.
LDAZES80S03
DIGITAL AUDIO MATRIX 8x8 WITH DSP + GPIO + LDA AUDIO MONITOR MODEL LDA ZES-80. 8 10 K Ohms Euroblock balanced inputs with selectable phantom power supply (48V) to 8 100 Ohms balanced Euroblock outputs, 16 configurable I/O GPIO ports. Audio monitor 2 Wrms, 1 RS-485 port. Frequency Response: 20-20000Hz +/- 0.5dB, THD+N<0.005dB, S/N>105dB, DSP: Equalizers, gain, compressor, limiters, generators, noise gates, AGC, Control and monitoring: RJ-45 connector for Ethernet, Indicators: Output signal, Clip, On, LDA link, Display, Dimensions in mm (HxWxD): 1U 44 x 483 x310, Weight: 4.75 Kg.
LDAZES22S02 DIGITAL AUDIO MATRIX WITH DSP AND COBRANET LINK MODEL LDA ZES-22: 4 configurable audio I/O, 10 KOhms Euroblock balanced inputs with selectable phantom power supply (12V), 100 Ohms balanced Euroblock outputs, 1 balanced input and configurable GPIO control, 1 24VDC output, Cobranet link (8 bundles) via standard Ethernet network RJ-45 with redundant connection for automatic commutation + 1x Duplex MM F.O. SC type Port., 16 configurable GPIO I/O, Frequency Response: 20-20000Hz +/- 0.5dB, THD+N<0.005dB, S/N>105dB, DSP: Equalizers, gain, compressor, limiters, generators, noise gates, AGC, Control and monitoring: Indicators: Vumeter, I/O mode, Clip, GPIO, 24VDC on, Dimensions in mm (HxWxD): 1/2U 44/24/310, Weight: 1 Kg.
EMERGENCY AND CONTROL UNITS
LDAASC82NS01 EMERGENCY CONTROLLER AND EMERGENCY SYSTEM MONITOR MODEL LDA ASC-82N: 7 microphone balanced inputs with ordinal priority 10 K Ohms + Euroblock control, 2 10 K Ohms configurable balanced line Euroblock inputs, 7 microphone Euroblock outputs loop-through-output 100 Ohms + Euroblock control, 1 Ethernet remote control/monitoring RJ-
45 input, 5 Contact closure inputs and 3 outputs for monitoring emergency system, 4 outputs with capacity to control up to 50
flash sirens and 50 attenuators, Standard EN-60849 functions: Pre-recorded emergency message broadcasting. Verification of pre-recorded message integrity. Constant verification of all elements of PA system. Warning of failure of any system element. Access to the system with password. Direct interface with external emergency detection system, Indicators: Operation mode, Pre-recorded message broadcast, Speaker status, System power supply status, External fire prevention system status, System server status, Active microphone, Configuration and monitoring display, Frequency response: 20-
20000Hz +/-0.5dB, S/N>105dB, Dimensions in mm (HxWxD): 1U 44x483x320, Weight: 4.85Kg.

LDAISL61NS02
 LDA LINE SURPERVISOR AND SWITCHER MODEL LDA ISL-61N: Line switch for 6 input lines to 6 output lines and 1 back- up line. Constant supervision of all lines, in compliance with EN-UNE 60849, 6 70/100V main line inputs with Euroblock, 1
70/100V reserve line input with Euroblock, 6 70/100V line outputs with Euroblock, 1 Ethernet RJ-45 control/monitoring input, 1
Euroblock input for system status, 1 Euroblock output for system status, Maximum power per line 600W, Indicators: On, Line status, Amplifier status, Reserve amplifier status, LDA link, Configuration/monitoring display, Dimensions in mm (HxWxD): 1U
44x483x365, Weight: 5 Kg.

LDAMR10ES02
 LDA DIMMER CONTROLLER MODEL MR-10: Controller for 10 attenuators lines with remote control inputs signals for each line, one control input sub-type D15, 1 control input ethernet RJ-45, 1 overall activation Fader with loop-type throw-output euroblock, 10 control outputs euroblock type attenuators, Indicators: on, LDA link, Dimensions in mm (H x W x D): 1U 44 x
483 x 315, Weight: 4.77 kg.
PAGING STATIONS
LDAA1S02
PAGING MICROPHONE MODEL LDA A-1: 1-zone desktop paging microphone. Frequency response: 200-15000Hz +/- 2dB, Balanced output: 750mV 600 Ohms, S/N > 100dB, Sensitivity -43dB, Type of capsule: Dynamic (moving-coil) with hypercardioid diagram, Power supply: 5 Vdc, chime, output gain control, Indicators: Busy line, floor microphone activated, Dimensions in mm (HxWxD): 45x125x125, Length of gooseneck 350mm.Weight: 0.85 kg.

LDAMCA1NS01
 PAGING MICROPHONE MODEL LDA MCA-1N: Desktop microphone with 1 zone memory + auxiliary system (automatic), System server control via Ethernet. System auto-test and monitoring display in compliance with EN-UNE 60849. Frequency response: 200-15000Hz +/- 2dB, Balanced output: 750mV 600 ohms, S/N > 100dB, Sensitivity -70dB, Type of capsule: Dynamic (moving-coil) with hypercardioid diagram, Power supply: 5 Vdc, Indicators: Line busy, Activated floor microphone, system failure, microphone capsule failure, failure sound warning, Dimensions in mm (HxWxD): 60x132x175, Length of gooseneck 250mm.Weight: 1.1 kg.
LDAMCA8NS01 MULTIZONE PAGING MICROPHONE MODEL LDA MCA-8N: Paging microphone with 8-zone memory + auxiliary system (automatic), System server control via Ethernet. System auto-test and monitoring display in compliance with EN-UNE 60849. Frequency response: 200-15000Hz +/- 2dB, Balanced output: 750mV 600 ohms, S/N > 100dB, Sensitivity -70dB, Type of capsule: Dynamic (moving-coil) with hypercardioid diagram, Power supply: 5 Vdc, Indicators: Busy zone, selected zone, floor microphone activated, system failure, microphone capsule failure, sound failure warning, Dimensions in mm (HxWxD):
60x132x175, Length of gooseneck 250mm.Weight: 1.35 kg.
LDAMCA8KS01 MULTIZONE PAGING EXPANSION UNIT MODEL LDA MCA-8K: Extension keyboard with 8-zone memories for MCA-XN series.System server control via Ethernet. Alimentación: 5 Vdc, Power supply: 5 Vdc, Indicators: Busy zone, selected zone, Dimensions in mm (HxWxD): 60x132x175Weight: 1 kg.
Voice Alarm (VA) Certified Speakers
LDACH42TNS01 EN 54-24 5 CEILING SPEAKER MODEL LDA CH-42TN: This 5 speaker for 70/100V lines has a built-in fire protection. 9W of maximum power.Low loss transformer of 6W, 3W, 1.5W,
0.75W @100V and 3W, 1.5W, 0.75W, 0.075W@70V. Frequency response: 180-20000 Hz +/-
10dB. SPL (1W/1m, 100-10k Hz): 91 dB. Dimensions: 181x129 mm. Weight: 1.29 Kg. Color: RAL:9003 and RAL 3000.

LDADS60TNS01
 EN 54-24 5 WALL MOUNT SPEAKER MODEL LDA DS-60TN: This 4 speaker for 70/100V
lines has a built-in fire protection. 9W of maximum power. Low loss transformer of 6W, 3W,
1.5W, 0.75W @100V and 3W, 1.5W, 0.75W, 0.075W@70V. Frequency response: 300-15000
Hz +/- 10dB. SPL (1W/1m, 100-10k Hz): 91 dB. Dimensions: 170x170x63 mm. Weight: 1.56 Kg. Color: RAL:9003.
LDAPCM20TNS01 EN 54-24 5 IP65 ANTI-VANDAL CYLINDRICAL SOUND PROJECTOR MODEL LDA PCM-
20TN: 5 metal speaker for 70/100V lines. Max power 30W. Low-loss transformer
20W/10W/5W/2.5W@100V, 20W/10W/5W@70V, Frequency response: 150Hz-20kHz, Sensitivity: 101dB/90dB (1W, 1m), Fire resistant cable. Material: Aluminum. Dimensions in mm (Diameter x Depth): 140 x 195 mm, Weight: 2,65 Kg, Colour: RAL: 9003. (U Bracket included)
LDAPCM220TNS01 EN 54-24 5,25 IP65 ANTI-VANDAL CYLINDRICAL BIDIRECTIONAL SOUND PROJECTOR MODEL LDA PCM-220TN: 5,25 metal speaker for 70/100V lines. Max power 30W. Low-loss transformer 20W/10W/5W/2.5W@100V, 20W/10W/5W@70V, Frequency response: 150Hz-
20kHz, Sensitivity: 101dB/90dB (1W, 1m), Fire resistant cable. Material: Aluminum. Dimensions
in mm (Diameter x Depth): 140 x 195 mm, Weight: 2,65 Kg, Colour: RAL: 9003. (U Bracket included)
Ceiling, Wall-Mount and Horn Speakers
LDASC32S01 3 CEILING SPEAKER MODEL LDA SC-32T: 3 metal speaker for 70/100V lines, Low-loss transformer 10 / 5W @ 100V, 5 / 2.5W@70V, Frequency response: 90-18000Hz +/- 10dB, Sensitivity: 85dB (1W 1m), Dimensions in mm (Diameter x Depth): 104x90. Weight: 0.63 kg, Colour: RAL: 9002
LDACH42TS03
6 CEILING SPEAKER MODEL LDA CH-42T: 6 metal speaker for 70/100V lines with fire- protection, Low-loss transformer 6W, 3W@100V and 3W, 1.5W@70V, Frequency response:
100-20000Hz +/- 10dB, Sensitivity: 92dB (1W 1m), Dimensions in mm (Diameter x Depth): 200
x 90. Weight: 0.9 kg, Colour: RAL: 9016.
LDASC85TS02 2-WAY 4 + 1 CEILING SPEAKER MODEL LDA SC-85T: 4 Woofer + 1 tweeter with crossover filter, made of metal for 70/100V lines with fire protection, Low-loss transformer 20 /
10 / 5 / 2,5W @ 100V, 20 / 10 / 5 / 2.5 / 1,25W @ 70V, 8 ohms. Frequency response: 65-
19500Hz +/- 3dB, Sensitivity: 87 dB (1W 1m), Dimensions in mm (Diameter x Depth): 202 x
180, Weight: 1,7 kg, Colour: RAL:9016.
LDASC95TS01 2-WAY 8'' +1/2'' CEILING SPEAKER MODEL LDA SC-95T. 8'' woofer + 1/2'' tweeter with crossover filter, made of metal for 70/100V lines. Low-loss transformer 40/20/10/5/2,5W@100V,
20/10/5/2.5/1,25W@70V, 8 ohms. Frequency response: 50Hz - 20kHz +/-3dB, Sensitivity: 88dB
(1W, 1m), Dimensions in mm (Diameter x Depth): 270 x 105, Weight: 1,8 kg. Colour: RAL9016.
LDADS60TS04 5 SURFACE SPEAKER MODEL LDA DS-60T: 5 metal speaker for 70/100V lines with fire protection, Low-loss transformer 6 / 3 / 1,5 / 0,75 / 0,25W @ 100V, 3 / 1,5 / 0,75 / 0,25 /
0,125W @ 70V. Frequency response: 120-18000Hz +/- 5dB, Sensitivity: 90dB (1W 1m),
Dimensions in mm (Length x Width x Depth): 185 x 185 x 72, Weight: 1.7 kg, Colour: RAL:
9016.
LDALS51TWS03 IP54 2-WAY 5 + 1 ACOUSTIC BOX MODEL LDA LS-51T: 5 woofer and 1 tweeter with crossover filter, made of ABS with acoustically transparent metal grille for 70/100V lines, Low- loss transformer 30 / 15 / 7,5 / 3,75W @100V, 30 / 15 / 7,5 / 3,75 / 1,9W @70V, 8 ohms. Frequency response: 200-18000Hz +/- 3dB, Sensitivity: 88dB (1W 1m), Dimensions in mm (Width x Height x Depth): 162 x 242 x 182, Weight: 2.5 kg, Colour: RAL9016. (U Bracket included)
LDAPCM20TS02 5 IP55 ANTI-VANDAL CYLINDRICAL SOUND PROJECTOR MODEL LDA PCM-20T: 5 metal speaker for 70/100V lines, Low-loss transformer 20 / 10W @100V, 20 / 10 / 5W @70V, Frequency response: 110-16000Hz +/- 5dB, Sensitivity: 88dB (1W 1m), Dimensions in mm (Diameter x Depth): 138 x 205, Weight: 2.2 kg, Colour: RAL: 9016. (U Bracket included)
LDAPS30TS01 IP66 EXPONENTIAL PROJECTOR MODEL LDA PS-30T: Conical directivity acoustic projector
70º vertical and 100º horizontal a +-3dB, made of ABS for 70/100V lines, Low-loss transformer
30 / 15 / 7.5 / 3.75W @100V, 30 / 15 / 7.5 / 3.75 / 1,9W @70V, 8 ohms, Frequency response:
250-8000Hz +/- 3dB, Sensitivity: 113dB (1W 1m), Dimensions in mm (Diameter x Depth): 285 x
280, Weight: 1.85 kg, Colour: RAL: 9010, (U Bracket included)
High-end steerable column array systems
EQ241947 MECHANICALLY STEERED ARRAYS SYSTEMS ICX7: Non-Powered, 350 W Pgm @ 6 Ohms
117dB Peak SPL 27 lbs / 12.2 Kg (net). Black ONLY. ICX7-II model stackable Specify B or W. It includes W-WALL-IC7 Wall mounting kit for IC7 and ICX7.
 
EQ241971 MECHANICALLY STEERED ARRAYS SYSTEMS IC7: Self-Powered, includes IC1-200 Amp Module. 117dB Peak SPL 27.3 lbs / 12.4 Kg (net). Specify B or W. IC7-II model stackable Specify B or W. It includes W-WALL-IC7 Wall mounting kit for IC7 and ICX7.
EQ241943 ICONYX-R DIGITALLY STEERABLE ARRAY SYSTEMS IC8-R-II: 8-Driver Digitally Controlled Column Loudspeaker - 8-Amp and DSP Channels. 96 dB Peak SPL @ 30m. 36 lbs / 16.3 Kg (net). It includes HK-IC8R&16R Wall mounting hinge kit for IC8-R-II, IC16-R-II and IC16/8-R-II columns Weight 5 lbs / 2.3 Kg (net).
 
EQ241972 ICONYX-R DIGITALLY STEERABLE ARRAY SYSTEMS IC8-R-II-WR: 8-Driver Digitally
Controlled Column Loudspeaker - 8-Amp and DSP Channels. 96 dB Peak SPL @ 30m. 36 lbs /
16.3 Kg (net). It includes HK-IC8R&16R Wall mounting hinge kit for IC8-R-II, IC16-R-II and
IC16/8-R-II columns Weight 5 lbs / 2.3 Kg (net). Weather Resistant
EQ241973 ICONYX-R DIGITALLY STEERABLE ARRAY SYSTEMS IC16/8-R-II: 16-Driver Digitally
Controlled Column Loudspeaker - 8-Amp and DSP Channels.96 dB Peak SPL @ 30m. 62 lbs /
28.1 Kg (net). It includes HK-IC8R&16R Wall mounting hinge kit for IC8-R-II, IC16-R-II and
IC16/8-R-II columns Weight 5 lbs / 2.3 Kg (net).
 
EQ241974 ICONYX-R DIGITALLY STEERABLE ARRAY SYSTEMS IC16/8-R-II-WR: 16-Driver Digitally
Controlled Column Loudspeaker - 8-Amp and DSP Channels.96 dB Peak SPL @ 30m. 62 lbs /
28.1 Kg (net). It includes HK-IC8R&16R Wall mounting hinge kit for IC8-R-II, IC16-R-II and
IC16/8-R-II columns Weight 5 lbs / 2.3 Kg (net). Weather Resistant

© 2014 Digital IT Distribution Co. Website By Ariba Graphics