Cambium Networks industry-leading 450 platform includes the all new PMP 450i and PTP 450i radios. The PMP 450i Access Point product platform is the most scalable industrial-grade wireless broadband solution available.
SPECIFICATIONS
SPECTRUM
Channel Spacing: Configurable on 2.5 MHz increments, 3 GHz customizable to 50 KHz
Frequency Range: 3 GHz : 3300 – 3900 MHz, 5 GHz : 4900 – 5925 MHz
Channel Width: 5 MHz, 7 MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz or 40 MHz
INTERFACE
MAC (Media Access Control) Layer: Cambium Networks proprietary
Physical Layer: 2×2 MIMO OFDM
Ethernet Interface: 100/1000BaseT, full duplex, rate auto negotiated (802.3 compliant)
Protocols Used: IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management: IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestroTM
MTU: 1700 bytes
VLAN: 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
PERFORMANCE
Subscriber Per Sector: Up to 238
ARQ: Yes
Maximum Deployment Range: Up to 40 miles (64 km)
Latency: 3 – 5 ms, typical
GPS Synchroization: Yes, via Autosync (CMM5 or UGPS)
Quality of Service: Diffserve QoS
PHYSICAL
Antenna Connection: 50 ohm, N-Type (Connectorized version only)
Surge Suppression (LPU fitted): EN61000-4-5: 1.2us/50us, 500 V voltage waveform Recommended external surge suppressor: Cambium Networks Model # C000000L033A
Mean Time Between Failure: > 40 Years
Environmental: IP67, IP66
Temperature / Humidity: -40°C to +60°C (-40°F to +140°F), 0-100% condensing
Reviews
There are no reviews yet.